Purpose of the Position:
Working under the Project Manager, the Senior Process Engineer will provide process design, process safety and process development to the organization while ensuring that technical excellence, cost, schedule and contractual requirements are achieved. This position is responsible for detailed execution of various sizes of projects and studies. The Senior Process Engineer will review and provide input into specifications, procedures and guidelines to ensure consistency throughout all projects.
Responsibilities:
- Complete the following detailed engineering design activities:
- Modeling, simulations and calculations of process units and process systems
- Conduct HAZOP meetings
- Generate control narratives
- Prepare start-up / operating manual
- Execute and review feasibility studies / conceptual design
Preparation and review of process engineering project deliverables including:
-
- Project design criteria, design basis and process specifications
-
- Developing and stamping of key design documents (Material Balance, PFD’s, P&ID’s and Shutdown Keys)
- Process data on control valves, PSV and instrument data sheet
-
- Sizing of equipment, piping, safety and control instruments and data sheets
- Play a vital role in the PRE-FEED and FEED stages of the project
- Assist with vendor technical bid evaluations for equipment
- Provide technical support to field personnel for start-up
- Monitor and review the following on a minimum weekly basis:
- Quality, cost and scheduling of the work
- Ensure that projects are being completed in a cost-effective way
- Ensure Grey Owl Engineering documentation meets the minimum standard of applicable regulatory codes
- Support the ongoing operations at Grey Owl Engineering:
-
- Troubleshooting, problem solving and support for the engineering team
- Supervision and checking of process work from junior and intermediate process engineers, including sign off
- Development of process engineering studies and technical notes
- Preparation of reports and recommendations for new technologies
- Development of process control and safety design philosophies
- Support Grey Owl Engineering’s HSE initiatives
- Other duties as assigned
Requirements:
- 10-15 years of experience in the oil and gas industry, preferably in an EPCM environment
- Bachelor Degree in Chemical Engineering, or equivalent from an accredited university
- Professional engineering registration or eligible for registry with APEGA
- Strong working knowledge of piping systems, P&IDs, PFDs and simulation software (Hysys, VMGSim, Pipeflo)
- Comprehensive working knowledge of Microsoft Office products
- Must possess strong leadership, communication and interpersonal skills
- Broad exposure to sweet and sour natural gas facility design and construction related to field facilities (well-sites, gathering systems, compression, etc.) and grass roots gas processing plants
- Experience with NGL Recovery, Acid Gas Injection Dehydration, Refrigeration, Sulphur Plant, Turbo-Expanders and Gas Sweetening Units will be an asset
- Excellent organizational, project management and team work skills
- Strong communication skills: verbal, business writing, electronic communications and presentations
Qualified candidates can submit their resume to [email protected]
We thank all those who apply, however only those considered for an interview will be contacted.
Return to Careers Page
Purpose of the Position:
Working under the Senior Process Engineer and the Project Manager, the Intermediate Process Engineer will provide process design, process safety and process development to the organization while ensuring that technical excellence, cost, schedule, and contractual requirements are achieved. They are responsible for detailed execution of various sizes of projects and studies.
Responsibilities:
- Complete the following detailed engineering design activities:
- Modeling, simulations and calculations of equipment, process units and process systems
- Participate in HAZOP meetings
- Support the generation of control narratives
- Prepare start-up / operating manuals
- Preparation and review of process engineering project deliverables including:
- Project design criteria, design basis and process specifications
-
- Developing and stamping of key design documents (Material Balance, PFD’s, P&ID’s and Shutdown Keys)
- Process data on control valves, PSV and instrument data sheet
-
- Sizing of equipment, piping, safety and control instruments and data sheets
- Play a vital role in the PRE-FEED and FEED stages of the project
- Assist with vendor technical bid evaluations for equipment
- Provide technical support to field personnel for start-up
- Support the ongoing operations at Grey Owl Engineering:
-
- Troubleshooting, problem solving and support for the engineering team
- Supervision and checking of process work from junior engineers, including sign off
- Development of process engineering studies and technical notes
- Preparation of reports and recommendations for new technologies
- Development of process control and safety design philosophies
- Support Grey Owl Engineering’s HSE initiatives
- Other duties as assigned
Requirements:
- Minimum of 5 years of prior related experience in the oil and gas industry, preferably in an EPCM environment
- Bachelor Degree in Chemical Engineering, or equivalent, from an accredited university
- Professional engineering registered or eligible for registry with APEGA
- Strong working knowledge of piping systems, P&IDs, PFDs and simulation software (Hysys, VMG Symmetry, Pipeflo)
- Comprehensive working knowledge of Microsoft Office products
- Excellent organizational, team work, planning and time management skills
- Strong communication skills: verbal, business writing, electronic communications and presentations
Qualified candidates can submit their resume and cover letter to [email protected]
We thank all those who apply, however only those considered for an interview will be contacted.
Return to Careers Page
The Opportunity:
The Intermediate Engineer under the direction of the Senior Engineer or Senior Project Manager, is responsible for the direction and coordination of various discipline’s activities for the successful completion of projects to the standard of both Grey Owl Engineering and our clients. This role maintains liaison between all disciplines assigned to projects to ensure mutual understanding is reached on all phases of work, as defined by the contract, and to ensure continuity of job progress and design.
Complete the following detailed engineering design activities:
- Preliminary estimations and details
- Design of facility and building layouts
- Design of piping systems and layouts
- Participation in HAZOP meetings and 3D model review meetings
- Address deviations and obtain appropriate approvals when necessary
Preparation and review of project engineering project deliverables including:
- Calculations
- Data sheets
- Engineering reports (PMP’s, DBM’s, Scoping Documents, technical reports)
- Project specifications
- Drawings (P&ID’s, Plot Plans, Isometrics, Piping Plans, etc)
- Project capital cost estimates and man-hour estimates
- Project schedules
Support the Project Manager in completing the following tasks:
- Coordination of project activities
- Monitoring of project scope changes
- Cost tracking
- Schedule tracking
- Development of meeting agendas and participation in client meetings
- Manage third party contractors in the completion of assigned work
Support to the Procurement team in the requisitions of contractors, materials, and other services by:
- Completing technical sections of request for quotes (RFQs)
- Reviewing the technical components of received bids
- Reviewing the technical aspects of bid spreads
- Liaison between clients and vendors / contractors
- Reviewing vendor and contractor QC documentation following contract award
Support the ongoing operations at Grey Owl Engineering:
- Assist in organizing and maintaining design guidelines
- Provide input in developing and maintaining company typical drawings
- Assist with reviewing proposed or existing codes and providing feedback
- Assist with the technical development and training of junior engineers and technologists
- Support company HSE initiatives
Requirements:
- 5 – 10 years of prior related work experience in the oil and gas industry in North America in an EPCM environment
- Degree in Mechanical or Chemical Engineering from an accredited university
- Professional engineering registered or eligible for registry with APEGA
- Field or shop experience during the project scoping, fabrication and construction phases
- Solid technical background in the design of mechanical equipment and piping systems
- Knowledge and application of ASME, API and CSA codes
- Comprehensive working knowledge of Microsoft Office products
- General understanding of the applicable regulatory codes and standards
- Strong analytical thinking, negotiating and problem-solving skills
- Excellent organizational, planning and time management skills
- Strong communication skills: verbal, business writing, electronic communications and presentations
Why Grey Owl Engineering?
Our Company is committed to providing an environment where we enable you to engage with our industry leading clients on a variety of capital and operating projects and be a key contributor to the success and growth of the Company. We help you be the best professional you can be in our services and industries.
What we bring to the table:
- Flexible working environment with the possibility for remote work options
- Benefits package which includes Medical, Dental and Life/long-term disability insurance
- Fast-paced, fun, and collaborative environment
- A team invested in you both personally and professionally
- Competitive compensation packages
- Complimentary 24/7 access to the Fifth Avenue Club, conveniently located on the second floor. This state-of-the-art facility offers a range of amenities including gym facilities, sauna, squash courts, and bike storage.
This position will be working in the Grey Owl Engineering Calgary, Alberta office. Travel to meeting and client sites in western Canada may be required.
Qualified candidates can submit their resume to [email protected]
We thank all those who apply, however only those considered for an interview will be contacted.
Return to Careers Page